 Don W. Dareing
Professor and Head |
Don W. Dareing
414 Dougherty Hall
University of Tennessee
Knoxville, TN 37966-2210
Office : (423) 974-5115
Fax : (423) 974-5274
email : ddareing@utk.edu |
|
Teaching
Machine Sciences
Design Methodology
Mechanical Vibration
Engineering Mechanics |
Education
Ph.D 1962, University of Illinois
MS 1959, Oklahoma State University
BS 1958, Oklahoma State University |
Research
Tribology (friction and wear)
Lubrication of Bearings
Tractive Rolling
Mechanics of Long Beam Columns
Oil and Gas Drilling |
RESEARCH INTERESTS
Machine sciences particularly as relates to friction and wear of machine elements, the
use of non conventional lubricants such as powder lubricants in high temperature
applications, mechanical vibration analysis, kinematics and dynamics of machine elements.
Problems associated with drilling oil and gas wells such as drillstring vibrations, drill
bit chatter, bottom hole assembly design, directional drilling and marine riser
performance.
PROFESSIONAL EXPERIENCE
| 1996 - Present |
Professor and Head of Mechanical and Aerospace Engineering and Engineering Science
Department,
University of Tennessee, Knoxville. |
| 1992 - 1995 |
Professor and Head of Mechanical Engineering Department,
University of Southwestern Louisiana, Lafayette. |
| 1986 - 1992 |
Professor of Mechanical Engineering,
University of Florida, Gainesville. |
| 1983 - 1986 |
Director, Drilling Technology,
Norton Christensen, Inc., Houston, Texas. |
| 1977 - 1983 |
Engineering Associate and Principal
Maurer Engineering, Inc., Houston, Texas. |
| 1974 - 1977 |
Supervisor of Marine Structures
Conoco North Sea, Inc., London, England. |
| 1966 - 1974 |
Professor of Engineering Science,
University of Arkansas, Fayetteville. |
| 1962 - 1978 |
Senior Research Engineer,
Exxon Production Research Company, Houston, Texas. |
PROFESSIONAL ACTIVITIES
| Member |
American Society of Mechanical Engineering (30 years)
Society of Petroleum Engineering (27 years)
American Society for Engineering Education |
SELECTED PUBLICATIONS
Dareing, D. W., and Atluri, Sathish, "Traction Behavior and Physical Properties of
Powder Graphite Lubricants Compacted to Hertzian Pressure Levels," STLE Tribology
Transactions, Vol. 40, No. 3, September 1997, pg. 413-420.
Batra, Anup and Dareing, Don W., "Hydrodynamic Behavior of Graphite Powder
Slurries in Journal Bearings," presented at the annual meeting of the Society of
Tribologists and Lubrication Engineers, May 1993, Calgary, Canada; SYLE, Tribology
Transactions, Vol. 38 (1995) 1, 161-167.
Rocheleau, David N. and Dareing, Don W., "Effect of Drag Forces on Bit Weight in
High Curvature Well Bores," Trans. ASME, Journal of Energy Resources Technology,
Vol. 114, No.3, September 1992, pp. 175-180.
Dareing, D. W., "Traction Coefficients of Teflon Transfer Films in Contact with
Soft Metal Coatings," Trans. ASME, Journal of Energy Resources Technology,
Vol. 113, April 1991, pp. 343-348.
Dareing, D. W., Tlusty, J., Zamudio, C., "Self-Excited Vibrations Induced by Drag
Bits," Trans. ASME, Journal of Energy Resources Technology, Vol. 112,
March 1990, 54-61.
Dareing, D, W., "Vibrations Increase Available Power at the Bit," Trans.
ASME, Journal of Energy Resources Technology, April 1984, pp. 637-644.
Huang, T., Dareing, D. W., and Beran, W. T., "Bending of Tubular Bundles Attached
to Marine Risers," Trans. ASME, Journal of Energy Resources Technology, Vol.
102, March 1980, pp. 24-29.
Dareing, D. W. and Huang, T., "Marine Riser Vibration Response Determined by Modal
Analysis," Trans. ASME, Journal of Energy Resources Technology, Vol. 101,
Sept. 1979, 159-166.
Dareing, D. W. and Chen, C. M., "The Contribution of Fluid Film Inertia to the
Thermodynamic Lubrication of Sector-Pad Thrust Bearings," Journal of Lubrication
Technology Trans. ASME, Vol. 98, Series F., No.1, Jan. 1976, 125-132.
Dareing, D. W. and Johnson, K. L., "Fluid Film Damping of Rolling Contact
Vibrations," Journal of Mechanical Engineering Science (Institute of
Mechanical Engineers), Vol. 17, No. 4, 1975, pp. 214-218.
Dareing, D. W. and Chen, C. M., "Kinematics and Evaluation of Flat-Toothed Hypoid
Gears," Journal of Engineering Industry, Trans. ASME, Vol. 95, Series B., No.
4, Nov. 19733, 1171-1177.
Dareing, D. W. and Neathery, R. F., "Marine Pipeline Analysis Based on Newton's
Method with an Arctic Application," Journal of Engineering for Industry,
Trans. ASME, Vol. 92, Series B., No. 4, Nov. 1970, 827-833.
Dareing, D. W., and Huang, T., "Buckling and Lateral Vibration of Long Vertical
Drill Pipes Having Different End Constraints," Journal of the Engineering
Mechanics Division, ASME, Vol. 95, No. EML, proc. Paper 6400, 167-181, Feb. 1969.
Dareing, D. W., and Huang, T., "Buckling and Lateral Vibration of Drill
Pipe," Trans. ASME, Journal of Engineering for Industry, Vol. 90, Series B.,
Nov. 4, 1968, 613-619.
Dareing, D. W., and Livesay, B. J., "Longitudinal and Angular Drillstring
Vibration with Damping," Trans. ASME, Journal of Engineering for Industry,
Vol. 90, Series B., No. 4, Nov. 1968, 671-679.
Huang, T. and Dareing, D. W., "Predicting the Stability of Long Vertical Pipe
Transmitting Torque in a Viscous Medium," Trans. ASME, Journal of Engineering for
Industry, Vol. 88, Series B., No. 2, May 1966, 191-200.
Dareing, D. W. and Radzimovsky, E. I., "Experimental Investigation of the Minimum
Oil-Film Thickness in Spur Gears," Trans. ASME, Journal of Basic Engineering,
Vol. 85, Series D., No 3, Sept. 1963, 451-456.
-->