1. On-Line Monitoring Regulatory Research Needs, Nuclear Regulatory Commission, 2004 - 2006.
2. Uncertainty Analysis Module Development for Non-Parametric Models, Expert Microsystem, 2005- 2006.
3. SCADA System Modeling and Diagnostics Using Empirical Models, Idaho National Laboratory, 2005-2006,
4. Empirical Model Optimization for Computer Monitoring and Diagnostics, Sun Microsystems, 2005- 2006
5. Improved Probability of Failure Analysis using Equipment Condition Assessment (ECA) Based on Health Monitoring Technologies, EPRI, 2005- 2006.
6. On-Line Power Plant Monitoring and Optimization, SmartSignal, Inc., 2004-2005
7. Redundant Sensor Online Monitoring and Evaluation Using Redundant Sensor Estimation Technique (RSET), TVA, 2004-2005
8. Automated On-Line Monitoring and Diagnostics of the Integrity of Nuclear Plant Steam Generators and Heat Exchangers, U.S. DOE, 2001-2004.
9. Cooperative Research Project on Monitoring and Diagnosis of Process System Components, National Science Foundation, 1999-2004.
10. Sensor Fault Detection for CAVIS, BWXT Y-12 Plant, 2002 - 2004
11. Multivariable State Estimation Technique Regularization and Optimization, SmartSignal, Inc. 2003-2004.
12. Uncertainty Analysis of NLPLS-Based Sensor Estimates, Halden Reactor Project, 2003.
13. Improved Real-time Fault Detection Algorithms, Sun Microsystems, 2002 - 2003.
14. Multivariable State Estimation Technique Variable Selection Optimization, SmartSignal Inc., 2002 - 2003.
15. Redundant Sensor Calibration Monitoring and Reduction System, Electric Power Research Institute, 2002 - 2003.
16. Uncertainty Analysis of Multivariable State Estimation Technique Sensor Estimates, SmartSignal Inc., 2001-2002
17. On-Line Sensor Calibration Monitoring and Fault Detection Phase III.
18. Agency: Maintenance and Reliability Center, 2000 – 2001.
19. On-Line Sensor Calibration Monitoring and Fault Detection Phase II.
20. Agency: Maintenance and Reliability Center, 1999 - 2000.
21. Combined Research Curriculum Development (CRCD) Program on Maintenance and Reliability Engineering, National Science Foundation, 1997-2000.
22. Research Experience for Undergraduates (REU) Supplement to Combined Research Curriculum Development (CRCD) Program on Maintenance and Reliability Engineering, National Science Foundation, 1997 – 1998.
23. Rotating Machinery Misalignment Detection and Prediction
24. Using Current Signature and Motor Flux Analysis, Duke Power, 1997-1998.
25. On-Line Sensor Calibration Monitoring and Fault Detection, Maintenance and Reliability Center, 1998 – 1999.
26. Rotating Machinery Misalignment Detection and Prediction Using Current Signature and Motor Flux Analysis, Duke Power, 1997-1998.
27. Motor Shaft Misalignment Bearing Load Analysis, Maintenance and Reliability Center, 1997 – 1998.
28. Motor Shaft Misalignment Analysis and Detection (MRC), Maintenance and Reliability Center, 1996-1997.
29. On-Line Sensor Calibration Monitoring and Fault Detection, Measurement Control and Engineering Center, 1996-1998
30. DOE Instrument Surveillance and Calibration Verification System
31. Agency: Department of Energy, 1995-1996