Interest Meeting
Lean more about Tau Beta Pi and what the pledge requirements are. You will receive an information sheet and two cards to fill out for the National Office. You will also sign up for an interview time.
Interview
Tau Beta Pi National Headquarters Conference Room Bring: Cards, Information Sheet It is required that everyone desiring to become a Tau Beta Pi Member have an interview with current Tau Beta Pi members. This is not an interrogation, it is simply done so members can get to know the people they will be initiating.
Service Projects
All electees are required to complete two service projects before they can be initiated. One project can be done outside of Tau Beta Pi, if desired. Visit the Service Page for more information on dates and times of Tau Beta Pi service projects.
Bent Polishing
Instructions:
- Start Early. Your bent cannot be shined in one day!!
- Machine tools are NOT allowed.
- All surfaces (Front, Back, Inner and Outer Sides) EXCEPT the Greek Letters mush be polished.
Procedure:
- Start with a metal file or coarse sand paper. Try to avoid creating ruts or uneven surfaces by filing/sanding too much in one spot.
- Once the entire bent is sanded with the coarse paper, move onto a medium grain, and then a fine grain.
- Move on to extra fine sandpaper (400 grit or higher) for an even better finish. After this, you can use a fine grain steel wool.
- Use a brass polish such as Brasso to finish the Bent.
- There will be a contest (and a prize) for the nicest Bent!
| Continue to Page 2 | Page 1/3 |